Retatrutide 40 mg pen

40mg of Retatrutide in a 3ml Cartridge inside a variable dose injection pen supplied with 8 needles. To be taken once weekly.

Instructions

Preparing the Syringe Pen for Use

1. Check the name on the pen label. You must ensure that the pen contains the correct medicine. This is especially important if you are using more than one injectable medicine.

2. Hold the pen with one hand and remove the cap from the pen by pulling it with the other hand.

3. Make sure that the solution in the pen is clear and transparent. Look through the window of the pen cartridge holder.

Note: If the solution is cloudy or there are foreign impurities, this syringe pen cannot be used.

4. Take a new needle and remove the protective sticker from the outer case. 

Note: Use a new needle with each injection to minimize the risk of injecting the wrong dose of the medicine, infection, and tissue trauma.

5. Using the outer needle case position it exactly on the needle screw holder. Tighten it securely so that the needle fits tightly onto the pen.

6. Remove the outer needle case, but do not throw it away. You will need it after completing the injection to safely remove the needle from the pen.

7. Remove the Inner case and discard. Hold the pen with the needle pointing up. Lightly tap the cartridge holder with your finger to release any air bubbles. Fine bubbles are acceptable.

Note: The needle becomes visible when inner case is removed.

When installing the needle on the pen a drop of the medicine may appear, which is normal. It is still necessary to check he passage (flow) of the medicine through the needle if the pen is used for the first time.

Checking the Passage of the Medicine through the Needle

8. Before using the pen for the first time, it is necessary to check the passage (flow) of the medicine through the needle. Scroll the dosage selector to the check symbol “- -” for checking the flow of the medicine so that the symbol coincides with the dose indicator. 

Note: If the dosage selector has missed the required symbol, rotate it in the opposite direction to correct the position back to the check symbol.

9. Hold the pen with the needle up, press the start button and hold it down. The dosage selector will click and the value will move to “0” in the dosage window. Then release the start button. Drops of the medicine should appear at the end of the needle.